Electronic Manufacturing & Assembly

Facilities housing electronics manufacturing and assembly require flooring features that enable workers to perform their jobs more effectively, namely static control properties and light reflectivity. APF's StatRez™ line of systems are designed to prevent electrostatic damage to products and equipment, limit the ability of personnel to build up a charge and quickly remove a charge from a person or equipment. They are more durable than ESD tile, and they do not have a dependency on relative humidity.

 

In addition to providing enhanced static control properties, flooring systems for this industry must be impact, abrasion and chemical resistant. They also need to be easy to clean and maintain. 

 

Electronic Manufacturing & Assembly Systems:

 

StatRez® PC 225

StatRez PC 225 is a three-coat aliphatic polyurethane system that features UV stability and non-yellowing properties. It is low VOC and has excellent chemical and abrasion resistance. StatRez® PC 225 is designed to impart static control properties in the static dissipative range of 1 million – 1 billion (1E6-1E9) ohms resistance when tested with ESD Association test method 7.1 and is commonly us

 

View System »

 

StatRez® PC 225C

StatRez PC 225 C is a low VOC, four-component, high-performance ali­phatic polyester urethane flooring product that features excellent chemical and abrasion resistance, UV stability and non-yellowing properties. This system is designed to im­part static control properties in the conductive range of 25,000 – 1 million (2.5E4-1E6) ohms resistance when tested with ESD Association test method 7.1.

 

View System »

 

StatRez® PC 350

StatRez PC 350 is a very versatile 100% solids static-dissipative, two-coat, epoxy system that’s designed to impart static control properties in the static dissipative range of 1 million – 1 billion (1E6-1E9) ohms resis­tance when tested with ESD Association test method 7.1.

 

View System »

 

StatRez® PC 350C

StatRez® PC 350 C is a very versatile, 100% solids, static-dissipative, three-coat epoxy system that’s designed to impart static control properties in the conductive range of 25,000 – 1 million (2.5E4-1E6) ohms resis­tance when tested with ESD Association test method 7.1.

 

View System »