- Effective with all levels of concrete moisture intrusion
- Guaranteed adhesion over silicate contaminated concrete
- May be applied to freshly poured concrete
- More than 20 million sq. ft. covered with 99% success
To learn more about concrete moisture- including slab design, the importance of a vapor retarder, accurate moisture remediation and moisture control - check out the APF white paper, Understanding Concrete Moisture.
VaporSolve® 100 LP System is a specially formulated 100% solids epoxy coating designed to comply with ASTM F-3010 and is for use over concrete with high moisture levels for the purpose of isolating the concrete from moisture sensitive flooring. When used without a primer in a single coat application, it is referred to as the VaporSolve Basic System.
The VaporSolve® Basic System consists of a single coat of VaporSolve® 100, a 100% solids epoxy. This system is applied at 16 mils over concrete that hasn’t been contaminated with reactive silicate curing compounds or densifiers...
The VaporSolve® Ultra System consists of a water-based epoxy as a primer that gives deeper penetration and better adhesion when applied to silicate-contaminated concrete, as well as a finish coat of VaporSolve® 100, which greatly reduces the possibility of concrete outgassing...